Your custom fire helmet shield is more than just a part of your gear—it’s a symbol of your service, dedication, and pride as a firefighter.
Installing your new firefighter helmet shield correctly ensures it stays secure and enhances the overall look of your helmet.
This easy, step-by-step guide will show you how to install your custom leather shield and make sure it’s properly aligned and securely attached.
What You’ll Need:
- Custom fire helmet shield
- Fire helmet (with existing shield, if applicable)
- Screwdriver or wrench (depending on helmet type)
- Drill and drill bit (sized to match your screws)
- Helmet hardware (screws, clips, or posts)
Step 1: Remove the Existing Fire Helmet Shield
If you already have a shield attached to your helmet, follow these steps to remove it:
- Locate the screws or clips: Most helmet shields are attached with screws or clips located at the front of the helmet.
- Loosen the screws: Use a screwdriver or wrench to carefully loosen and remove the screws. Set the screws and hardware aside for use with your new custom helmet front.
- Remove the old shield: Gently remove the old shield from the helmet. If the shield is stuck, apply light pressure to release it from the helmet.
Step 2: Position and Mark Your Custom Shield
Now it’s time to prepare and position your new custom fire helmet front for installation:
- Align the shield: Position your custom shield at the front of the helmet, making sure it lines up with the mounting points where the hardware will attach. Make sure you get it in the exact position you want it.
- Check the fit: Ensure that your shield fits flush against the helmet for a secure installation and professional appearance.
- Mark the holes: Press the shield firmly against the helmet, aligning it with the existing mounting holes. This will create imprints on the back of the shield where you’ll need to drill. (pro tip: get the back of the shield wet first)
- Drill the holes: Lay the shield flat and use the drill to carefully create holes where you marked the back. Drill through the shield from the back to the front.
- Test the holes: Make sure the screws or hardware easily slide through the newly drilled holes. If needed, widen the holes slightly to ensure a smooth fit.
Step 3: Secure the Custom Fire Helmet Shield
With your holes drilled, it’s time to attach the helmet front to your helmet:
- Insert the screws: Line up the shield with the helmet’s mounting points and insert the screws or hardware through the shield and into the helmet.
- Tighten the screws: Use your screwdriver or wrench to carefully tighten the screws. Ensure that the screws are snug, but avoid over-tightening, as this could damage the shield or helmet.
Step 4: Maintaining Your Custom Helmet Shield
To keep your new custom fire helmet shield in top condition, it’s essential to maintain it regularly:
- Clean regularly: Wipe down the shield with a damp cloth after use to remove dirt, soot, and debris.
- Check the screws: Periodically check the screws and tighten them as necessary to ensure the shield stays secure.
- Condition the leather: If your shield is made of leather, apply a leather conditioner to prevent cracking and maintain its durability over time.
Conclusion
Installing your custom fire helmet shield is a straightforward process that will enhance your helmet’s appearance and functionality.
A properly installed shield reflects your commitment to the firefighting profession and ensures your helmet is as durable and reliable as you are.
By following these simple steps, you’ll be ready to wear your new helmet front with pride on every call.
If you have any questions or need additional help with installation, don’t hesitate to reach out. We’re here to make sure your gear performs as reliably as you do. Order your custom fire helmet shield today and represent your firefighting journey with pride!
Please feel free to use the Contact Us for if you have any questions. Click here to return to fire helmet shields home page.